EN
EN - 9
STANDBY/ON
When you rst connect the Soundbar to the mains socket, the Soundbar will be in Standby
mode.
• Press the
button on the Soundbar or on the remote control to switch the Soundbar ON.
• Press the button again to switch the Soundbar back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch the Soundbar OFF
completely.
Automatic Power Off Function
The Soundbar automatically turns to Standby mode after about 15 minutes if the TV or the
external unit is disconnected, switched o or the volume is too close to mute.
• To switch the Soundbar off completely, remove the mains plug from the mains socket.
• Please turn the Soundbar off completely to save energy when not in use.
SELECT MODES
Press the (SOURCE) button on the Soundbar or the AUX, , OPT/COA, HDMI 1/2,
HDMI eARC and USB buttons on the remote control to select the desired mode. The selected
mode will show on the display.
ADJUST THE BASS/TREBLE LEVEL
Press the BASS +/- buttons on the remote control to adjust bass level.
Press the TREBLE +/- buttons on the remote control to adjust treble level.
TURN THE SURROUND SOUND ON/OFF
Press the VERTICAL/SURROUND button on the remote control to turn on the surround sound.
Press this button again to turn o the surround sound.
SELECT EQUALIZER (EQ) EFFECT
Press the VOICE / SPORT / MOVIE / MUSIC buttons on the remote control to select your
desired preset equalizer eects.
ADJUST THE VOLUME
Press the +/- (VOLUME) buttons on the Soundbar or on the remote control to adjust the
volume. If you wish to turn the sound o, press the (MUTE) button on the remote control.
Press the (MUTE) button again or press the +/- (VOLUME) buttons on the Soundbar or on
the remote control to resume normal listening.
ADJUST THE BRIGHTNESS
Press the DIMMER button on the remote control to select brightness level.
To Next Page
Loading...
Need help?
General
