JVC XL-R5010BKC User Manual

ERRATA
INCORRECT CORRECT
4
Turn the MULTI JOG control or press the
2
/
3
(menu) button on the remote control to select
“HIGH” or “1x”.
• If “HIGH” is selected, “HIGH” flashes in the display window.
• Press the CANCEL button (main unit/remote control) to cancel
the procedure and return to the normal display.
4
Turn the MULTI JOG control or press the
2
/
3
(menu) button on the remote control to select
“HIGH” or “1x”.
• If “HIGH” is selected, “HIGH” flashes in the display window.
• Press the CANCEL button (main unit/remote control) to cancel
the procedure and return to the normal display.
5
Press the SET button.
4
Turn the MULTI JOG control or press the
2¥3
(menu) button on the remote control and
choose the setting “TR SPACE ON” or “TR
SPACE OFF”.
• Press the CANCEL button (main unit/remote control) to cancel
the procedure and return to the normal display.
4
Turn the MULTI JOG control or press the
2¥3
(menu) button on the remote control and
choose the setting “TR SPACE ON” or “TR
SPACE OFF”.
• Press the CANCEL button (main unit/remote control) to cancel
the procedure and return to the normal display.
5
Press the SET button.
Set the timer immediately after turning on the power to the main
unit for the first time. Additionally, should there be a power black-
out that lasts for longer than one hour
, or if the AC power cord of
the unit is unplugged from the wall socket for longer than one hour
,
please check to see if the clock needs to be reset again before using
any other operation.
Set the timer immediately after turning on the power to the main
unit for the first time. Additionally, should there be a power black-
out that lasts for longer than a few seconds
, or if the AC power cord
of the unit is unplugged from the wall socket for longer than a few
seconds, please check to see if the clock needs to be reset again
before using any other operation.
5
Press the SET button.
• "DAILY TIMER" is shown in the information window.
To set DAILY TIMER Proceed to step 5
.
To set ONCE TIMER Press the MENU button and display
"ONCE TIMER", and then proceed to
step 5
.
5
Press the SET button.
• "DAILY TIMER" is shown in the information window.
To set DAILY TIMER Proceed to step 6
.
To set ONCE TIMER Press the MENU button and display
"ONCE TIMER", and then proceed to
step 6
.
Setting the Unit for High-speed
Recording
Setting the Auto Track Spacing
Function
Setting the Present Time
Timer Play (wake-up play)
LE40829-001A
Page 29
Page 30
Page 40
There were some errors in the instruction manual. We apologize for this and correct them as follows.
Page 38
Errata sheetA4.fm Page 2 Wednesday, May 9, 2001 9:47 PM

JVC XL-R5010BKC Specifications

Power

power requirements	120V, 60Hz
power consumption (power ON mode)	40W
power consumption (STANDBY mode)	5W

Output Terminals

analog output	2V/5kΩ
headphones output	4mW/32Ω
digital optical output	–21dBm - –15 dBm

Weight and Dimensions

dimensions (W x H x D)	435mm x 127mm x 334mm
mass	6.3kg