'
Prevention of Accidental Erasure
To prevent erasing a recorded tape accidentally,
break off the tabs on the rear of the tape as
shown.
Recording on this side is no longer possible.
You can stop this being effective by covering
the hole with a piece of adhesive tape.
Technical specifications
Power supply
AC 120V ~ 60Hz (UL Version)
110/220V ~ 60/50Hz (Dual Voltage Version)
Batteries 8 x LR14 or equivalent
Radio frequency coverage
A M 530 - 1710 kHz
F M 88 - 108 MHz
CD player
Pick Up 3-beam, Semi-conductor Laser
Encodin 1 Bit DA Converter
8 x Oversampling
Recording system DC Bias
Erasing system Magnetic Erase
General
Speaker 8 Ohms
For furture reference, fill in the space provided for model number and serial number.
Model No.: ________________
Serial No.: _________________
To Previous Page
Loading...
