Building Basics
Spacers
There are places in your model where you
need to use spacers. Be sure to use the correct
number of spacers shown in the instructions.
Connectors
You can slide these special connectors together. Push tightly until you hear a
“click”. Pay close attention to the instructions and position them horizontally
or vertically exactly as they are shown.
Flexi-rod
A Flexi-rod is a rod that you bend to make curves.
It will be easier to attach to your model if you
bend it back and forth first.
Start Building
To begin your model, find the and follow the numbers. Each piece has
its own shape and color. Just look at the pictures, find the pieces in your set
that match,and then connect them together. Try to face your model in the
same direction
as the instructions
while you build.
The arrows show
you where the parts
connect, but not all
connection points
have arrows. Faded
colors show you
this section is
already built.
1
2
1
3
4
1
2
-
3
To Next Page
Loading...
