Chapter 5
158 Kaba Ilco Lodging Access Control System
Equipment required: FDU
Lock communication cable
Initialization keycard
Programming keycard
Completed Planning Forms
Minimum keycard required: Programming Authorization
Steps to reset lock time:
1. If power to the lock has been interrupted, insert the Initialization keycard in the
lock. The red and green indicators should light, and then only the green indicator
should flash. Re-insert the Initialization keycard if the pattern of indicator lights
described is not observed.
2. Swipe a keycard or enter a PIN value having a Programming authorized user
level.
3. Press 8 or use the down <T> arrow followed by < > to reach the “FDU
Programming” menu.
4. Press 1 or < > to reach the “Lock Programming” menu.
5. Press 6 or use the down <T> arrow followed by < > to reach the “Reset Time”
menu.
To Next Page
Loading...
