Implementing the System
Kaba Ilco Lodging Access Control System 173
6.4.1.1 Initializing the First FDU
Purpose: To start the first FDU in the system
Minimum keycard required: GMA keycard that shipped with the FDU
Required condition: FDU has been charged a minimum of 24 hours
Steps to initialize the first FDU:
1. The screen will show an hourglass. After a brief pause, the following screen will
appear to perform language, date and time adjustment. If the screen does not
come up please contact Kaba Technical Support.
Use the left <W> or right <X> arrow to select the desired language. When the
appropriate language is chosen, use the down <T> arrow.
2. To change the time display format, press the up <S> or down <T> arrow to
select the “Time Display” option and press the left <W> or right <X> arrow to
toggle between 12-hour and 24-hour format as desired. Based on the selected
time format the date format will also change. The following shows the
differences between the 2 formats:
12-hour format
24-hour format
Standard Date:
MM/DD/YYYY YYYY-MM-DD
Standard Time:
12 hrs + A (AM) or P (PM) 24 hours
3. To change the date, press the up <S> or down <T> arrow to select the “Std
Date:” option, and press the right <X> arrow to change the date.
To Next Page
Loading...
