Front Desk Units - Using and Programming
Kaba Ilco Lodging Access Control System 31
Press < > to load the factory expiries defaults.
3.5.3.3 Loading the Default Features values:
If required, the factory default features can be reloaded into the FDU to overwrite any
changes previously done.
1. Swipe a keycard having a GMA or MA authorized user level.
2. Press 7 or use the down <T> arrow followed by < > to reach the “FDU Setup”
menu.
3. Press 2 or use the down <T> arrow followed by < > to reach the “FDU Features”
menu.
4. Press 6 or use the down <T> arrow followed by < > to reach the “Load Factory
Features” menu.
To Next Page
Loading...
