Front Desk Units - Using and Programming
Kaba Ilco Lodging Access Control System 43
The FDU suggests a new PIN value that was never supplied to date. If the value
shown is acceptable press <
>.
If a custom value is desired select “New PIN:” and enter the PIN value. Press < >
to assign the new PIN to the authorized user.
It is highly recommended to always use the suggested PIN provided by the FDU.
NOTE: If the PIN is already in use by another authorized user the FDU will refuse
the duplicate PIN. Additionally, if the PIN was previously revoked a warning
message will be given. Refer to Section 3.5.5.1 - Create/Assign a PIN – New
employees:
6. Once the PIN is acceptable, press < > to reach the confirmation screen.
Press < > to assign the new PIN to the authorized keycard or press < > to go
back to the previous menu. If accepted, the following message is displayed:
To Next Page
Loading...
