Front Desk Units - Using and Programming
Kaba Ilco Lodging Access Control System 71
3.6.18. Accept PIN
Purpose: Enables the FDU to allow the use of PINs as a replacement for certain levels of
keycards.
Shortcut: Swipe a GMA keycard, press 7, 2, 3 and 4
Default: Disabled
Options: YES: Enabled
NO: Disabled
When “Accept PIN” is set to YES as shown above the FDU will allow the use of PINs
as a replacement for certain authorization levels.
By default “Accept PIN” is set to NO and the FDU will not allow the use of PINs to
access the system. In this configuration an authorization keycard is always required to
access the FDU.
Use the left <W> or right <X> arrow to toggle between YES and NO. Press <
> to
save the setting.
3.6.19. Create PIN
Purpose: Enables the FDU to allow the creation of PINs for certain authorization level keycards.
Shortcut: Swipe a GMA keycard, press 7, 2, 3 and 4
Default: Disabled
Options: YES: Enabled
NO: Disabled
To Next Page
Loading...
