Kaba MIFARE - Functions with Access Manager Firmware

Online operation with firmware option Access Manager
28 k4evo707en-2012-07
4.2 Functions with firmware option Access Manager
All data concerning access decisions is saved in the parent control unit. The control unit is
responsible for badge authorization checking and triggering access points.
Access control
 Authorization check procedure based on badges and time authorization
 Integrated RFID antenna
- Triggering of integrated visual and acoustic signal transmitter
- Slide switch for antenna calibration
 Triggering of electric strike (doors with electric locking elements)
 Support for a connected door opener key or door handle contact
 Monitoring of door status using frame/magnetic contact
 External tamper monitoring (PCB plugged in)
 CardLink support: validation and devalidation
 Standalone access control (without host system); see also chapter 4.2.1 / page 29
Restrictions if the connection is interrupted (offline)
MIFARE
Reduced authorization check based on site keys. The door function is retained, depending on the
offline parameter settings (see Chapter 4.4.5.2/Page 34).
 Up to 8 site keys can be saved
 Logbook for 2,000 events
 Time zones are not taken into account
 No room monitoring/balancing and no CardLink functionality
 No change in fabrication key
LEGIC
Reduced authorization check based on segment search keys. The door function is retained,
depending on the offline parameter settings (see Chapter 4.4.5.2/Page 34).
 Up to 8 segment search keys can be saved
 Logbook for 2,000 events
 Time zones are not taken into account
 No room monitoring/balancing and no CardLink functionality
When the connection is restored
Saved bookings and status/alarm messages are automatically forwarded when the connection is
restored.