Kaba MIFARE - Page 42

Online operation with firmware option cDML
42 k4evo707en-2012-07
5.2 Functionalities with firmware option cDML
All data concerning access decisions is saved in the parent control unit (AMC/II). The control unit is
responsible for badge authorization checking and triggering access points.
Access control
 Badge authorization check based on company codes/badges and time authorization
 Integrated RFID antenna
- Triggering of integrated visual and acoustic signal transmitter
- Slide switch for antenna calibration
 Triggering of electric strike (doors with electric locking elements)
 Support for a connected door opener key or door handle contact
 Monitoring of door status using frame/magnetic contact

 External tamper monitoring (PCB plugged in)
 CardLink support: validation, devalidation and register UID later
IMPORTANT
The LR-100 compatibility mode is not supported.
Restrictions if the connection is interrupted (offline)
Access decision based on company codes/badges and time authorization; in other words
 Saving of up to 10,000 badges, self-learning
 Saving of up to 32 time zones without exceptional days
 Logbook for 2,000 events
 No room monitoring/balancing and no CardLink functionality
When the connection is restored
Saved bookings and status/alarm messages are automatically forwarded when the connection is
restored.