SAM
®
RF Operations Manual 95
Section 5: Keys
© SAFLOK WL 12/20/2007
Creating Master Keys (continued)
10. Click OK on the PC dialog box
screen message to create
additional keys. Follow the
procedure described above to
continue creating duplicate keys.
The SAM RF System designates every new key created as Key ID 1. Each subsequent key you create as
a duplicate key will be designated Key ID 2, Key ID 3, etc. – up to Key ID 64. Carefully assigning key IDs
will increase the level of security the SAM RF System provides – allowing you to know exactly who has
which keys and helping you make sure that any lost or stolen keys no longer provide access.
Note: The “Keys Made This Session” number at the bottom of the PC dialog box will change to reflect
each key you create.
Note: It is recommended that you label each key as it is created to avoid confusion later.
To Next Page
Loading...