EasyManua.ls Logo

Kaba Saflok SAM RF - Creating Additional Duplicate Master Keys

Kaba Saflok SAM RF
193 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAM
®
RF Operations Manual 96
Section 5: Keys
© SAFLOK WL 12/20/2007
5.3 Creating Additional Duplicate Master Keys
Note: The maximum number of duplicate keys is 64. After you have made 64 duplicate keys, you must
start over by making a new key for that level.
1. Be sure that the PC is turned on, the electronic key encoder device is plugged in an electrical outlet
and the USB cable between them is properly attached (see Section 2.5 “Installing the Electronic Key
Encoder and Utility Device”).
2. To create additional Master keys,
click on the Keys menu at the top of
the window or the Keys icon.
3. Point to Create, then select Master
Key.
4. At the Create Master Key PC dialog box, it
is important to accept (i.e., do not change)
the default setting of Duplicate Key
because this will NOT be the first master
key you are creating.
5. If you wish to limit the number of hours per day that this key will provide access, you can do so now.
To assign an expiration date – during the time a new hire is on probation, for example – click the
open box next to Key Expires. A Date field will appear beneath these words. Simply enter an
appropriate date in the Date field.
6. At this point, refer to the previous section to continue duplicating Master keys, starting with Step 7.

Table of Contents