Kaba Saflok SAM RF - Creating Additional Emergency Keys

To Next Page

To Previous Page

SAM

RF Operations Manual 100

Section 5: Keys

5.5 Creating Additional Emergency Keys

Note: The maximum number of duplicate keys is 64. After you have made 64 duplicate keys, you must

start over by making a new key for that level.

1. Be sure that the PC is turned on, the electronic key encoder device is plugged in an electrical outlet

and the USB cable between them is properly attached (see Section 2.5 “Installing the Electronic Key

Encoder and Utility Device”).

Note: The utility device need not be in the electronic key encoder to create keys.

2. To create additional Emergency

keys, click on the Keys menu at the

top of the window or the Keys icon.

3. Point to Create, then select

Emergency Key.

4. At the Create Emergency Key PC dialog box, it

is important to accept (i.e., do not change) the

default setting of Duplicate Key because this

will not be the first master key you are creating.

5. At this point, refer to the previous section to continue duplicating Emergency keys, starting with

Step 5.