SAM
®
RF Operations Manual 132
Section 5: Keys
© SAFLOK WL 12/20/2007
Creating Resident/Unit Keys (continued)
6. The key will have no expiration date unless
you assign one. If you wish to assign an
expiration date, click the box next to Key
Expires. A Date field will appear beneath
these words. Enter the desired key
expiration date in the Date field. You must
name the person to whom you wish to
assign the key in the box under The Key Is
Assigned To. Click the button to the right of
the box. (This button has a hand pointing to
the right.)
7. Assuming you are creating a key for a resident, click the open circle
next to Resident and click OK.
Note: Resident keys can be assigned to either staff members or residents.
8. This will take you to the Resident List PC
dialog box. Any residents registered into the
system for that particular unit will be listed in
this box. Simply click on the name of the
person to receive this key and click Select.
Note: To add a resident into the system, see
Section 4.7 “Adding Residents to the SAM RF
System”.
To Next Page
Loading...