Kaba Saflok SAM RF - Creating a Replacement Resident Key

To Next Page

To Previous Page

SAM

RF Operations Manual 140

Section 5: Keys

5.25 Creating a Replacement Resident Key

Note: The maximum number of duplicate keys is 64. After you have made 64 duplicate keys, you must

start over by making a new key for that level.

1. Be sure that the PC is turned on, the electronic key encoder device is plugged in an electrical outlet

and the USB cable between them is properly attached (see Section 2.5 “Installing the Electronic Key

Encoder and Utility Device”).

Note: The utility device need not be in the electronic key encoder to create keys.

2. Click on the Keys menu at the top

of the window or the Keys icon.

3. Point to Create, then select

Resident Key.

4. In the Create Resident/Unit Key PC

dialog box, it is extremely important to

accept the default Duplicate Key

option. Selecting the New Key option

will invalidate ALL other Resident keys

for this unit.

5. At this point, please reference

“Resident Key Options” and “Encoding

the Resident Key” earlier in this

section to continue duplicating

replacement Resident keys until you

have enough keys. Be sure to assign

them as duplicate keys to create a

new key ID for respective residents

and/or staff members.