Kaba Saflok SAM RF - 7.1 SAM RF System Reports - Common Functions

SAM
®
RF Operations Manual 164
Section 7: Reports and Maintenance
© SAFLOK WL 12/19/2007
7.1 SAM RF System Reports – Common Functions
The SAM RF System provides a high degree of security by allowing you to reprogram (rather than
completely change out) locks as well as electronically program keys and locks. In addition, SAM provides
a number of reports to help you monitor activities around your property. Information about the reports and
how to access them follows the list of available reports below.
• Unit key history report
• User key history report
• Keys made report
• Lock audit report
• Limited use key audits report
• Transactions report
Note: In order to generate reports on the SAM RF System, a printer must be assigned to the computer.
Because SAM RF System reports have many similar functions, rather than describe each function
repeatedly when discussing each report, the most common report functions are discussed in this section.
Selecting a Date Range
Almost all SAM RF System reports allow you to select a range of dates for the report desired. The default
settings provide a time range of just one day. There are several options for changing the date range.
1. Click on the large down arrow (▼) next to Beginning Date or Ending Date
to display the date range calendar.
The double arrow buttons (◄◄ ►►) will change the date range from year
to year, while the single arrow buttons (◄ ►) will change the date range
from month to month.
There are also four buttons near the bottom of the calendar that allow you
to quickly clear the date, choose the current date and accept or cancel the
settings.
2. Click on a specific day in the date range calendar. This will automatically enter the desired numbers
into the Beginning Date field.
3. Once you have opened up a date range calendar, small up/down arrows appear right next to the
date. These buttons allow you to quickly change the month field; clicking the up arrow moves the date
up a month, while clicking the down arrow moves the date back a month.
4. Highlight over the individual number field (month/day/year) you wish to change and type in the
desired number(s).