SAM
®
RF Operations Manual 19
Section 2: Installing the SAM RF System
© SAFLOK WL 12/19/2007
2.4 Installing the SAM RF System Software with Multiple Databases
This section explains how to install multiple SAM RF databases on the SAM RF server (the computer
where you intend to load the SAM RF database files). This process should only be done if your
organization has requested and/or received separate databases.
Important: Do not connect the key encoder and utility device until all software is installed.
1. Insert the SAM RF software CD into the SAM RF server. The Security Access Manager Installation
program should launch automatically and the Welcome PC dialog box will appear.
Note: If the setup program does not auto-start, go to the Start menu and click Run. Click Browse to find
the setup.exe file located on the CD-ROM and double click it. Back at the Run PC dialog box, click OK.
2. Click Next at the Welcome PC dialog
box.
3. Be sure that both components are
selected and click Next to continue.
Important: Check both boxes before
continuing with the installation process.
To Next Page
Loading...