Kaba Saflok SAM RF - Installing the USB Driver Software

SAM
®
RF Operations Manual 28
Section 2: Installing the SAM RF System
© SAFLOK WL 12/19/2007
Installing the USB Driver Software (continued)
4. Click Next at the bottom of the CP2101 Custom
Setup Utility PC dialog box that begins with the
Uninstall File.
5. Click Next at the bottom of the CP2101 Custom
Setup PC dialog box that indicates the COM and
USB devices.
6. Click Next at the bottom of the third CP2101
Custom Setup PC dialog box with the vendor ID
and the product ID.