SAM
®
RF Operations Manual 59
Section 4: Management Functions
© SAFLOK WL 12/19/2007
Assigning the System Administrator (continued)
4. Using the example to the right as a guide, type your
information into the Staff Form – ADD Mode PC
dialog box. At the top, type in your last name, first
name, and middle name or initial (optional) in the
appropriate fields. In the Position field, type
Administrator, Manager, or another appropriate
descriptor.
Note: A user name can range from one to 15
characters and a password can range from three to ten
characters. This information will become the user ID
and password that you will use each time you log on to
the SAM RF System.
5. Click on the small box next to Administrator. This
will give you full authority to access all aspects of
the SAM RF System.
6. Click Save. You will return to the Staff List PC dialog box. Click Close to return the SAM RF System
main menu.
Note: If someone else will ultimately be the system administrator, you can register him/her using these
instructions. You may still want to register yourself with full system administrator authority if you will be
performing a number of administrative functions.
To Next Page
Loading...