SAM
®
RF Operations Manual 72
Section 4: Management Functions
© SAFLOK WL 12/19/2007
4.7 Adding Residents to the SAM RF System
1. Click on the Management menu at
the top of the window or the
Management icon.
2. Point to Maintenance, then select
Residents…
3. At the Unit/Resident List PC dialog box, all units within your
property will appear in the Unit/Resident List. Click on the unit
where the resident is moving, then click Add.
4. At the Resident Form – ADD Mode PC dialog box, enter as
much information as you can about the resident, including his
or her name, work phone and home phone numbers. There is
also space to record some notes about the resident.
Note: If the Limited Access box is checked here at this Add Mode screen, when making keys for this
resident, any defaults for common access areas previously set will be disabled. An example of when to
check the limited access box would be for children residing in the unit who may not have access to the
pool or health club. You can still manually select common access areas you may want the resident to
have access to when making the key.
To Next Page
Loading...