SAM
®
RF Operations Manual 85
Section 4: Management Functions
© SAFLOK WL 12/19/2007
4.12 Printing Work Orders
1. To print an existing work order, click
on the Management menu at the
top of the window or the
Management icon.
2. Click on Work Orders…
3. At the Work Orders List PC dialog box, click on the work order you
wish to print and then click Report. This will display the Output
Options PC dialog box.
4. At the top of the Output Options PC dialog box, your default printer
will be listed. Below that will be a Report Destination box along with
three options:
• Printer: To print the report out as hard copy
• Preview: To view the report on screen
• File: To save the report to your hard drive or to disk.
Note: Although you have the option to print or to save the report to file, it is highly recommended that you
first preview the report on screen. You will once again have the option to print or save from the preview
screen. Also, unless you specifically delete a work order, it will remain in the SAM RF System indefinitely.
To Next Page
Loading...