Need help?Do you have a question about the KADAMS K0007STH and is the answer not in the manual?
General| Model | K0007STH |
|---|---|
| Category | Clock |
| Type | Wall Clock |
| Frame Material | Plastic |
| Movement | Quartz |
| Size | 30cm |
Describes the various icons and indicators on the device's LCD screen, including temperature, humidity, and time.
Details the IP24 rating and its implications for water spray resistance, suitable for bathroom and kitchen use.
Explains the 12/24hr clock time display and its switchability between AM/PM and 24-hour formats.
Covers the active timer mode, maximum duration of 99 minutes, and touch screen buttons for setting.
Describes how the timer alarm activates upon completion, its duration, and returning to real-time mode.
Explains the indoor temperature (C/F) and humidity (RH) measurements and their display.
Highlights the eye-friendly LCD color for better vision and large, clear display digits for readability.
Explains the visual indicator that appears on the LCD screen when battery power is low.
Details the waterproof rubber seal ring for moisture protection and the ABS lightweight material.
Lists the three available mounting options: stand, wall hanging, and suction cup for versatile placement.
Details the function of TIME, UP/CF, DOWN, and RESET buttons for switching modes and setting the time.
Explains how to start, set duration using 1-min/10-min buttons, and quit the timer countdown mode.
Explains how the hygrometer measures RH and its operating range from 20% to 95%.
Describes preferred stand/hole methods and provides advice for suction cup use on specific surfaces.
Warns against using solvents, immersion in water, and tampering with internal components for safety.
Explains the visual indicator for low battery power and voltage thresholds for replacement.
Lists the item size, weight, and power requirements (2x AAA batteries) of the clock timer.
Outlines the 1-year limited warranty terms, coverage for defects, and exceptions.
To Next Page