7. Adjust angle of brake lever, meter, gear shifter and louder controller
on handle bar, then tighten them with tools.
8. Remove the battery
8.1 Insert the battery key into the keyhole.
8.2 To remove the battery, turn the key forward.
8.1 8.2
9. Accelerator installation instructions
9.1 Loosen the brake lever and shifting handle with tools and move forward to reserve
a certain installation space for thumb speed control;
9.2 Take out the thumb from the small box to adjust the speed and install the
handlebar;
9.3 Find an unplugged plug in front of the front of the car, and plug the thumb speed
control plug against it;
To Next Page
Loading...