To Next Page
J
Joseph RobertsAug 13, 2025
How to troubleshoot no power to pump or vac motor in my Kaivac Other?
- SsgarciaAug 13, 2025
If there's no power to the pump or vacuum motor, start by checking if the machine is properly plugged in and the switches are in the “on” position. Also, test and reset the GFCI. Inspect the building circuit to ensure it's not overloaded and reset it if necessary. If these steps don't resolve the issue, disconnect the power and check for any loose wires on the switches or under the panel.
General