Kaiweets KC602 - Introduction and Safety; Safety Information

Introduction-EN
Thank you for selecting the KAIWEETS KC602 Digital Clamp Meter. It is an auto-ranging True RMS
B600A AC/DC Clamp Meter with inrush current capture.
Safety information
/\Warnings: Read First
To avoid possible electric shock or personal injury, please obey the following instructions:
* Please read this manual carefully before using the instrument, and pay attention to safety
warning information.
* Avoid using the instrument alone.
* Never measure AC current while the test leads are still insert into the input jacks.
* Do not use the meter in wet or dirty environments
* Inspect the test leads before use. Do not use them if insulation is damaged or metal is exposed.
* Check the test leads for continuity. Replace damaged test leads before using.
* Use extreme caution when working around bare conductors or bus bars. Contact with the
conductor could result in electric shock.
* Do not apply more than the rated voltage, as marked on the meter, between the terminals or
between any terminal and earth ground.