Kaiweets KOT936 - Page 8

2. Introduction of 900M soldering iron tips:
a4
Cutter head shape 900M-T-K: Both vertical and pull
welding can use soJ/soP to correct bridge tin
I —
Flat head 900M-T-D: Suitable for soldering with large
tin content, large welding area, thick terminals and
large solder joints
[ o
Horseshoe shape 900M-T-C: Suitable for soldering
with large tin content, large welding area, thick
terminals and large solder joints
[T
Conical 900M-T-B: Suitable for general welding, large
and small welding spots
[ =
Cusp shape 900M-T-I: Suitable for small space
welding correction chip to generate tin bridge
IV. Technical parameters
Power supply voltage US: AC 110V/60Hz
UK: AC 220V-240V/50Hz
EU: AC 220V/50Hz
JP: AC 100V/50Hz
Power consumption 60w
Temperalure range 200-480C
Leakage voltage of soldering iron tip <Bmv
Standard soldering iron tip S00M