11.2016
125
16 Disposal
Kamstrup A/S is environmentally certified according to ISO 14001, and as far as possible and as part of our
environmental policy we use materials that can be recycled in an environmentally correct way.
Kamstrup A/S has calculated carbon footprint of all meters.
Disposal by Kamstrup A/S
Kamstrup accepts worn-out meters
for environmentally correct disposal according to previous agreement. The
disposal is free of charge to the customer, except for the cost of transportation to Kamstrup A/S.
The customer sends for disposal
The meters must not be disassembled prior to dispatch. The complete meter is handed in for approved
national/local disposal. Enclose a copy of this chapter in order to inform the recipient of the contents.
Please note that lithium cells, and meters containing lithium cells must be shipped as dangerous goods. Please
see Kamstrup document 5509-682 “Shipping of battery powered heat meters and lithium batteries”
Subject Material Recommended destruction
Lithium cells in MULTICAL
602
Lithium and Thionylclorid >UN 3090<
D-cell: 4.9 g lithium
Approved destruction of
lithium cells
PC boards in MULTICAL
602
(LC-display must be removed)
Copper epoxide laminate with
soldered componenets
Print board scrap for
concentration of noble
metals
LC-display Glass and liquid crystals
Packing Environmental cardboard Cardboard recycling (Resy)
Packing Polystyrene EPS recycling
Please direct any questions you may have concerning environmental matters to:
Kamstrup A/S
FAO: Environmental and quality
assurance department
Fax.: +45 89 93 10 01
info@kamstrup.com
Heat meters from Kamstrup are marked according to the EU directive
2012/19/EU and the standard EN 50419.
The purpose of marking is to inform that the heat meter cannot be disposed
of as ordinary waste.
To Next Page
Loading...
Need help?
General
