Need help?Do you have a question about the K&B Furniture K04 and is the answer not in the manual?
General| Brand | K&B Furniture |
|---|---|
| Model | K04 |
| Category | Indoor Furnishing |
| Language | English |
Insert cam screw into hole as shown in diagram A, avoiding over-insertion.
Connect panels, ensuring the cam lock arrow faces the cam screw for proper interlocking.
Turn the cam lock clockwise 90-180 degrees until the arrow faces the opposite direction.
Attach Stopper D to Top Support Bar A5 using the included screw.
Attach Magnet C to Middle Support Bar A6 using the included screws.
Assemble Support Bars A5 & A6 to Side Panels A2 & A3 using Camlocks A and Wood Dowels B.
Attach the legs (A15) to the bottom of the Bottom Panel (A7).
Assemble Bottom Panel A7 to Side Panels A2 & A3 using Wood Dowels B and Bolts E with Nuts L.
Insert Towel Bar A17 into Bars A16, then assemble Bars A16 to Left Side Panel A2.
Repeat the previous step to assemble the second Towel Bar A17 and Bars A16 to Right Side Panel A3.
Assemble Top Panel A1 to Side Panels A2 & A3 using Wood Dowels B and Camlocks A.
Assemble Top Panel A1 to Top Support Bar A5 using Screws F.
Assemble Back Panel A4 to Side Panels A2 & A3, Top Panel A1 and Bottom Panel A7 using Screws G.
Assemble Drawer Side Panels A9 to Drawer Back Panel A11 using Screws H.
Insert Drawer Bottom Panel A10 into grooves on Drawer Side Panels A9 and Drawer Back Panel A11.
Assemble Drawer Front Panel A8 to Drawer Side Panels A9 using Screws H.
Attach Knob I to Drawer Front Panel A8 with the included bolt.
Insert the fully assembled drawer into the unit as shown.
Insert Shelf Supports J into Side Panels A2 & A3, then place Adjustable Shelf A14 onto supports.
Insert Pin K into Right Door A13, connect to Bottom Panel A7, and attach Knobs I to doors.
Repeat the door installation process for the Left Door A12.
For safety, attach the unit to the wall using Anchor N and Anti-tip Kit O.
To Next Page