KAP Medical SKINGUARD Series User Manual (English)

Questions and Answers:

J
jeffrey13Aug 12, 2025
How to fix a KAP Medical Equipment mattress that is not inflating properly?
- T
  Terri McmillanAug 12, 2025
  If your KAP Medical Equipment mattress isn't inflating or alternating properly, first check if the mattress hose is disconnected and connect/lock it. Ensure the bolsters' deflate hose is plugged in using the attached plug. Inspect the air hose for kinks or splits, and un-kink or replace it if needed. Also, check for major leaks in the air cushions or overlay pad, replacing them if necessary. Finally, inspect manifold for kinks or splits, and un-kink or replace it if needed.
K
Kimberly AndersonAug 22, 2025
What to do if my KAP Medical Equipment has no power?
- R
  robert65Aug 22, 2025
  If your KAP Medical Equipment isn't getting any power, start by verifying that the control unit is turned on and connected to a working power source. Ensure the power cord is properly connected. Check that the power source itself has power and is switched on. If there's a power outage, wait for the power to be restored. Lastly, inspect the fuse and replace it with an equivalent one if it's blown.
H
Helen VegaAug 30, 2025
Why is the Auto Fowler Transmitter not working with my KAP Medical Equipment?
- S
  Samuel MooreAug 30, 2025
  If the Auto Fowler Transmitter is missing, set up a new one with the control unit. If the transmitter isn't set up, configure it to work with the control unit. For a non-responsive transmitter, check if the LED is red, indicating a low battery that needs replacement (contact KAP Medical for a spare).

KAP Medical SKINGUARD Series Specifications

General

Brand	KAP Medical
Model	SKINGUARD Series
Category	Medical Equipment
Language	English

KAP Medical SKINGUARD Series User Manual

Table of Contents

Questions and Answers:

KAP Medical SKINGUARD Series Specifications