To Next PageTo Next PageWhat to do if my Kärcher CNS 18-30 Battery Chainsaw does not start up?
If your Kärcher Chainsaw doesn't start, there are several possible reasons: * The battery pack may be empty. In this case, charge the battery pack. * The battery pack could be defective, requiring a replacement. * The battery pack might not be correctly inserted. Ensure it is pushed into the mounting until it properly latches into place.
Why does my Kärcher Chainsaw stop during operation?
Your Kärcher Chainsaw might stop during operation due to overheating. Either the battery or the motor could be the cause. If the battery has overheated, stop working and allow it to cool down to normal temperature. Similarly, if the motor has overheated, stop working and let it cool down.
Why Kärcher Chainsaw does not start?
Your Kärcher Chainsaw might fail to start due to several reasons: the battery pack could be empty, requiring a charge. Alternatively, the battery pack might be defective, suggesting a replacement. Another possibility is that the battery pack isn't correctly inserted; ensure it's pushed into the mounting until it latches.
How to fix Kärcher Chainsaw that does not start?
If your Kärcher Chainsaw isn't starting, try these steps: Charge the battery pack, as it might be empty. If that doesn't work, the battery pack may be defective and need to be replaced. Also, make sure the battery pack is correctly inserted by pushing it into the mounting until it latches into place.
General| Power source | Battery |
|---|---|
| Idle speed | - RPM |
| Motor type | Brushless |
| Chain gauge | 1.1 mm |
| Chain pitch | 3/8 \ |
| Chain speed | 10 m/s |
| Blade length | - mm |
| Product color | Black, Yellow |
| Cutting length | 250 mm |
| Chain bar length | 300 mm |
| Oil tank capacity | 0.2 L |
| Oil level indicator | Yes |
| Uncertainty K | 1.5 m/s² |
| Sound power level | 101 dB |
| Sound pressure level | 87.9 dB |
Weight and Dimensions| Width | 230 mm |
|---|---|
| Height | 245 mm |
| Length | 690 mm |
| Weight | 3200 g |
| Package weight | 5000 g |
Observe safety measures and code of behaviour for working with chain saws.
Only use the device for its proper use.
Keep work area clean and well lit, and ensure electrical safety.
Stay alert, use PPE, and maintain power tools for safe operation.
Recharge only with specified charger and use designated battery packs.
Have your power tool serviced by a qualified repair person using identical parts.
Keep all body parts away from the saw chain when operating.
Kickback may occur when the nose or tip of the guide rail touches an object.
Using the device for longer periods can cause poor circulation due to vibrations.
Low-risk chains and chain catchers reduce kickback likelihood.
Bucking spikes provide stability; chain brakes stop the chain in danger.
General warning symbol and other safety icons on the device.
The maximum equipment is described in these operating instructions.
Mounting the chain and guide rail.
Risk of fatal injury from cut injuries. Wear suitable protective clothing.
Steps for filling oil, checking chain tension, and installing battery.
How to operate the chainsaw, switch it on, and interrupt operation.
Proper techniques for safe chainsaw operation and hazard prevention.
Planning the fall direction, preparing the work area, and setting the felling cut.
Techniques for cutting tensioned wood, pruning branches, and cutting trunks.
How to trim tensioned trunks and finish operations.
Proper procedures for transporting and storing the chainsaw.
Cleaning the device and performing maintenance intervals.
Regular maintenance tasks, including checking chain brake and adjusting tension.
Guide to resolving common faults and information on product warranty.
Specifications for the chainsaw, including voltage, speed, and dimensions.
Statement of compliance with EU directives and harmonized standards.
