EasyManua.ls Logo

Kärcher HD PRO - Page 7

Kärcher HD PRO
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
WATER SUPPLY (Cold Water Only)
WARNING
Water that has owed through backow
preventers is considered to be non potable.
Use a water lter to avoid potential damage
from dirt in the water supply.
▄ Garden hose must be at least 5/8 inch inside
diameter.
▄ Flow rate of water supply must not fall below
2.64 GPM (Gallons per minute) (10 L/Min
(Liters per minute).
▄ Flow rate can be determined by running the
water for one minute into an empty 5 Gallon
bucket (20 Liter container).
▄ Supply water pressure must be greater than
40 PSI.
▄ The water supply temperature must not ex-
ceed 104°F/40°C.
▄ Never use the pressure washer to draw in
water contaminated with solvents, e.g. paint
thinners, fuel, oil, etc.
▄ Always prevent debris from being drawn into
the unit by using a clean water source. Use
additional water lter.
▄ Do not operate pressure washer without the
water turned on.
Hardware (included)
ASSEMBLY INSTRUCTIONS
Description Purpose Illustration Qty
A
Detergent
siphon hose
Tank assembly 1
B Tank Tank assembly 1
C
Hexagonal
¼" bolt
Tank assembly / Nozzle
holder assembly
4
D Tank knob
Tank assembly / Nozzle
holder assembly
4
E Knob Handle assembly 2
F Nozzle holder Nozzle holder assembly 1
G
Quick connect
nozzle kit
Nozzle kit
assembly
1
H Spray wand Spray gun assembly 1
IMPORTANT SAFETY INSTRUCTIONS

Related product manuals