To Next PageTo Next Page
Need help?Do you have a question about the Kärcher K 4.85 MD and is the answer not in the manual?
General| Brand | Kärcher |
|---|---|
| Model | K 4.85 MD |
| Category | Pressure Washer |
| Language | English |
High-pressure cleaner designed for domestic use only for cleaning machines, vehicles, etc.
Information on recycling packaging and old appliances for proper disposal.
Link to find current information about product ingredients.
Indicates immediate danger causing severe injury or death.
Indicates a hazardous situation leading to severe injury or death.
Indicates a hazardous situation leading to mild injury or property damage.
Warning symbol indicating the need to protect the appliance from frost damage.
Warning about dangers of improper use of high-pressure jets.
Appliance can be destroyed by frost if not completely drained.
Never touch mains plug/socket with wet hands. Check cords for damage.
Do not use if power cord or key parts like hoses/trigger gun are damaged.
Inspect power cord and plug for damage before use. Arrange replacement if damaged.
Inspect high-pressure hose for damage before use. Arrange immediate replacement if damaged.
Appliance must not be used in areas with explosion risk; observe safety provisions.
Do not direct jets at people, animals, or live electrical equipment.
Do not clean objects containing hazardous substances like asbestos.
Maintain 30cm distance to avoid tyre/valve damage.
Do not spray flammable liquids; avoid solvents, acids, and flammable mists.
Use approved, watertight extension cables with adequate cross-section.
Always fully unroll electrical cables from the cable drum.
Use only manufacturer-recommended hoses, fixtures, and couplings.
Not for persons with reduced physical, sensory, or mental capabilities.
Supervise children, keep packaging away, consider nearby persons.
Wear protective clothing and safety goggles.
Switch off during downtimes, avoid temperatures below 0°C, protect cables.
Never leave the appliance unattended while in operation.
Connect to electrical supply installed per IEC 60364; use correct voltage/current.
Recommended to use an earth-leakage circuit breaker for safety.
Operations producing oily waste water require an oil separator.
Check appliance contents upon unpacking. Contact dealer for missing parts or damage.
Overview of appliance components and features as per operating instructions.
Mount loose parts and connect the high-pressure hose to the trigger gun.
Trigger gun has recoil force; ensure firm footing and grip.
Ensure appliance stability and wear protective gear before cleaning.
Adjust working pressure by turning the spray lance.
For stubborn dirt; not for sensitive surfaces or detergents.
Use KÄRCHER detergents only. Fill detergent tank as instructed.
Description of safety devices like power switch, trigger lock, and overflow valve.
Ensure appliance stability by placing it on an even surface before operation.
Appliance must not be used without a system separator on the drinking water supply.
Connect hose to water connection, observe regulations, use suitable hose.
Connect hose, open tap, insert plug, turn appliance on.
Apply detergent, let it react, then rinse with high-pressure jet.
Release/lock trigger gun. Turn off appliance for breaks over 5 minutes.
Flush system with clean water, release pressure, switch off, and unplug.
Lift by carrying handle or pull by transport handle.
Empty detergent tank and secure appliance against movement.
Store on even surface, stow accessories. Follow care instructions for long-term storage.
Drain all water to prevent frost damage; store in a frost-safe room.
Turn off and unplug appliance before any maintenance work.
Clean detergent suction filter and water connection sieve.
The appliance is maintenance-free.
Turn off and unplug appliance before any troubleshooting or maintenance.
Check trigger, voltage, and cable connections if appliance does not start.
Verify spray lance, ventilation, water supply, and clean sieve for pressure problems.
Check for voltage drop; pull trigger before switching on.
Clean nozzle bore and check water flow quantity for pressure variations.
Minor leaks are normal; contact service for significant increases in leakage.
Use Vario Power lance, set to 'Mix', clean filter, and check suction hose.
Contact KÄRCHER UK helpline with model/data details for product assistance.
