Kärcher K 5 Compact - Product Specifications and Support; Troubleshooting Specific Faults; Warranty, Technical Data, and Compliance

English 11
bRinse the high-pressure nozzle from the front
with water.
2. Check the water supply volume.
evice leaki
1. The device leaks a small amount for technical rea-
sons. If the leak is severe, request authorised Cus-
tomer Service.
eteret is ot scked i
1. Use the Vario Power spray lance and turn it all the
way in the "SOFT" direction.
2. Clean the filter on the detergent suction hose.
3. Check the detergent suction hose for kinks.
arrat
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
echical data
Subject to technical modifications.
E eclaratio of Coformit
We hereby declare that the machine described below
complies
with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: High-pressure cleaner
Type: 1.630-xxx
Crretl applicale E irectives
2000/14/EC
2014/30/EU
2006/42/EC (+2009/127/EC)
2011/65/EU
armoised stadards sed
EN 50581
EN55014-1:2017
EN 55014-2: 2015
EN 60335-1
EN 60335-2-79
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 62233: 2008
Coformit evalatio procedre sed
2000/14/EC: Appendix V
Sod power level dA
Measured: 8
Guaranteed: 9
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor: S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2018/10/01
Electrical coectio
Voltage V230-240
Phase ~1
Frequency Hz 50
Connection output kW 2,1
Degree of protection IPX5
Protection class I
Power protection (slow-blowing) A 13
ater coectio
Feed pressure (max.) MPa 1,2
Input temperature (max.) °C 40
Input amount (min.) l/min 10
Suction height (max.) m0,5
evice performace data
Operating pressure MPa 12,5
Max. permissible pressure MPa 14,5
Water flow rate l/min 7,5
Maximum flow rate l/min 8,3
Detergent flow rate l/min 0,3
High-pressure gun recoil force N 20
imesios ad weihts
Typical operating weight kg 13,9
Length mm 354
Width mm 308
Height mm 520
etermied vales i acc. with E 
Hand-arm vibration value m/s
2
< 2,5
K uncertainty m/s
2
0,7
Sound level L
pA
dB(A)
7
K uncertainty
pA
dB(A) 3
Sound power level L
WA
+ K
uncertainty
WA
dB(A)
9
Chairman of the Board of Management
Director Regulatory Affairs & Certification
H. Jenner
S. Reiser