10 English
protect the internal parts of the
pressure washer for a longer life.
For Kärcher detergents, check your
retailer or visit our website:
www.Karcher.com/us
Never Use:
● Bleach, chlorine products and other
corrosive chemicals
● Liquids containing solvents (i.e., paint
thinners, gasoline, oils)
● Tri-sodium phosphate products
● Ammonia products
● Acid-based products
These chemicals will harm the unit
and will damage the surface being
cleaned.
Use of these items will void the
warranty.
Detergents can only be applied at low
pressure.
1. Install the soap nozzle to the quick
connect on the end of the wand by
pulling the collar back, inserting the
soap nozzle, then pushing the collar
back. Check to make sure the nozzle
is secure.
2. Fill the soap tank with Kärcher
detergent. This machine is equipped
with a dual soap tank system,
allowing you to use two different
detergent solutions.
3. Turn on the pressure washer by
stepping on the foot pedal. Pull
trigger to operate unit. Liquid
detergent is drawn into the unit and
mixed with water. Apply detergent to
work area. Do not allow detergent to
dry on surface.
4. Turn the dial all the way to “1” to
select the detergent inside tank #1.
Turn the dial all the way to “2” to
select the detergent inside tank #2.
5. To rinse, replace the soap nozzle with
the 15° nozzle and pull trigger to
operate.
To Next Page
Loading...
Need help?
General
