– 11
Risk of injury
Always switch off the appliance and pull out
the mains plug before care and mainte-
nance work.
With an uneven spray jet.
Illustration
Loosen nozzle attachment and pull out,
clean or replace spray nozzle.
1 x year or as needed.
Illustration
Turn the lock and loosen it. Take out
the sieve and rinse it with water.
Fill up fresh water reservoir.
Check the fresh water reservoir for cor-
rect fit.
Detergent pump defective, contact Cus-
tomer Service.
Clean the spray nozzle of the wash noz-
zle.
Close the surrounding air separator at
the handle.
See diagram 11
Accessories, suction hose or suction
tubes are clogged, please remove the
obstruction.
Filter bag is full, insert a new filter bag
(for the order no. please see the spare
parts list at the end of the present in-
structions).
Cleaning the foam filter
Fill up fresh water reservoir.
Plug in the main plug.
The overheat alarm has been triggered,
please allow appliance to cool down.
Subject to technical modifications!
Maintenance and Care
Clean the spray nozzle
Clean the sieve in the fresh water
reservoir
Faults
No water exiting from nozzle
Spray stream uneven
Insufficient vacuum performance
Detergent pump noisy
Appliance is not running
Specifications
Voltage
1~ 50/60 Hz
220 - 240V
Mains fuse (slow-blow) 10 A
Container capacity 18 l
Water intake, max. 4 l
Output P
nom
1200 W
Output P
max
1400 W
Power cord H05-VV-
F2x0,75
Sound pressure level
(EN 60704-2-1)
74 dB(A)
Special accessories
Order No.
Filter bags (5 ea.) 6.959-130.0
Cartridge filter 6.414-552.0
Spray ex hand nozzle for up-
holstery cleaning
2.885-018.0
Carpet cleaner RM 519
(1 l bottle)
Germany 6.295-271.0
International 6.295-370.0
International starting 2013 6.295-771.0
Textile waterproofing-agent
Care Tex RM 762
(0.5 l bottle)
Germany 6.290-003.0
International 6.295-374.0
International starting 2013 6.295-769.0
19EN
Downloaded From Vacuum-Manual.com Manuals
To Next Page
Loading...
