EasyManuals Logo

Kärcher SV 7 Operating Instructions

Kärcher SV 7
Go to English
412 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
– 13
Illustration
Push the main switch.
The first level of the indicator lamps for
the suction performance starts to flash.
Illustration
Push the steam boiler switch, the switch
lights up.
Wait until the indicator lamp for the
pressure indication is on.
The appliance is now ready for steam
operation.
Illustration
Illustration
Simultaneously push the steam button
and briefly the suction button on the
handle.
The suction operation starts with the
minimum performance and steam is
discharged simultaneously.
For further use of the steam and vacuuming
function see Chapter "Steaming operation
and vacuuming operation"
Illustration
Place the steam suction pipe in the
parking holder during interruptions of
work.
If the appliance is not used for more than 15
minutes, it automatically changes into the
standby mode and the boiler switches off.
The first stage of the indicator lamp for the
suction performance starts to flash more
slowly as with the normal switch-on of the
suction indicators.
There are the following options for recom-
missioning:
Abbildung
Switch the main switch off and back on.
or
Illustration
Illustration
Push the steam button or suction button
for at least 3 seconds.
Illustration
Push the main switch.
Illustration
Separate the mains cable from the pow-
er supply system.
Illustration
Disconnect the steam plug from the ap-
pliance. Hold the steam plug lock down
and pull the steam plug out of the appli-
ance connector.
ATTENTION
Material damage due to a lack of
cleaning the accessories after use.
Always thoroughly clean all
accessories prior to storing
the appliance.
Disconnect all accessories.
Rinse all accessories with clear water
under a tap.
Rinse pipes and steam suction hose
with clear water using the pipe cleaning
brush.
Allow accessories to dry afterwards.
Store the appliance at a dry and frost-
proof location.
Illustration
Lift the handle of the water container.
Pull out the water filter container.
Illustration
Turn the handle towards the back.
Remove the water filter insert.
Illustration
Draining the water filter container by tilt-
ing it towards the pouring device.
Illustration
Pull the pipe bend off the filter casing
with the grid with the micro-perforation
until it is completely removed.
Steam and vacuum cleaning
operation
Putting Down the Accessories
Energy saver mode
Finish operation
Storing the Appliance
Emptying and cleaning the water filter
container
27EN

Table of Contents

Other manuals for Kärcher SV 7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kärcher SV 7 and is the answer not in the manual?

Kärcher SV 7 Specifications

General IconGeneral
TypeCylinder steam cleaner
Capacity1.2 L
Cord length6 m
Product colorBlack, Silver, Yellow
Boiler power1100 W
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Ready time5 min
Steam pressure4 bar
Adjustable steamYes
Cleaning surfacesCarpet, Hard floor, Laminate, Tiles
Continuous steam performance65 g/min
Steam-ready light-
Weight and Dimensions IconWeight and Dimensions
Depth510 mm
Width330 mm
Height340 mm
Weight9100 g
Package weight15600 g

Related product manuals