Kärcher SV 7 Operating Instructions

– 15
Illustration
 Slide the locking mechanism of the floor
nozzle outwards.
 Put the insert into the bottom side of the
brush.
 To secure the insert, slide the locking
mechanism inwards.
 Removing the insert: Slide the locking
mechanism outwards again.
 Remove the insert.
The closer you hold the nozzle to the dirty
spot, the higher the cleaning effect as tem-
perature and pressure of the steam reach
their maximum values immediately when
they are emitted from the nozzle.
 The use of the detail nozzle is recom-
mended for hard to reach areas.
 Cleaning of stainless steel, window
panes, mirrors and enamel surfaces.
 Cleaning of corners on stairs, window
frames, door posts, aluminium profiles.
 Cleaning of fittings.
 Cleaning of window shutters, radiators.
ATTENTION
Material damage (e.g. scratches
on painted surfaces) due to the
use of the round brush on sensi-
tive surfaces.
 Do not use the round brush
on sensitive surfaces.
 The round brush is suitable for stubborn
soiling on especially small surfaces
such as stove tops, roller shutters, tile
joints, sanitary facilities, etc.
 Extension: With this accessory an opti-
mum cleaning of places that are partic-
ularly hard to reach is possible. Ideal for
cleaning heaters, door posts, windows,
roller shutters, sanitary facilities.
 The use of the hand suction nozzle is
recommended for large glass and mir-
ror surfaces, smooth surfaces in gener-
al or for the cleaning of textile surfaces,
such as sofas, mattresses, etc.
 Window cleaning insert wide: Window
panes and surfaces of larger dimen-
sions.
 Window cleaning insert narrow: Win-
dow panes and surfaces of smaller di-
mensions.
 Brush collar: For carpets, staircases,
car interiors, textile surfaces in general
(after carrying out a test on a hidden ar-
ea). For abrasive cleaning and scrub-
bing.
 Terry cloth cover: Pull over the hand
nozzle. Especially well-suited for small
washable areas, shower stalls and mir-
rors.
ATTENTION
Material damage due to steam
release onto cold window
panes.
 In seasons with particularly
low temperatures, pre-warm
the window panes by releas-
ing steam with a distance of
approx. 50 cm to the surface
to be treated.
ATTENTION
Material damage due to steam
release onto sealed spots of the
window frame.
 Do not level the steam at
these spots.
 Apply steam to the glass surface from a
distance of approximately 20 cm until
the surface is moistened evenly.
 Switch off the steam supply.
Mounting the attachments
Detail nozzle
Application examples
Detail nozzle and accessories
Hand nozzle
Application examples
Hand nozzle and accessories
Cleaning of Glass
29EN

Kärcher SV 7 Specifications

General

Type	Cylinder steam cleaner
Capacity	1.2 L
Cord length	6 m
Product color	Black, Silver, Yellow
Boiler power	1100 W
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Ready time	5 min
Steam pressure	4 bar
Adjustable steam	Yes
Cleaning surfaces	Carpet, Hard floor, Laminate, Tiles
Continuous steam performance	65 g/min
Steam-ready light	-

Weight and Dimensions

Depth	510 mm
Width	330 mm
Height	340 mm
Weight	9100 g
Package weight	15600 g