– 8
Illustration
To connect an electric tool.
To carry the appliance or to remove
the appliance head after unlocking.
Illustration
To store the mains cable.
Illustration
Connect the suction hose to the
blower connection, this will activate
the blower function.
Illustration
Pull out to open, push in to lock.
Illustration
To rest the floor nozzle during work
interruptions.
Illustration
The accessories compartment al-
lows the storage of suction pipes
and suction nozzles on the appli-
ance.
Illustration
The steering rollers are located in
the waste container when the appli-
ance is delivered. These must be
attached prior to starting up the ap-
pliance.
Note: Do not use a filter bag for wet
vacuuming!
Illustration
Recommendation: To vacuum fine
dust, use the filter bag.
Illustration
The cartridge filter must always be
installed - with wet and dry vacuum-
ing.
Note: Let the wet cartridge filter dry pri-
or to using it for dry vacuuming.
Illustration
Push the suction hose into the con-
nection on the appliance, it snaps in
place.
In order to disconnect it, push down
with your thumb and pull the suction
hose out.
Note: Accessories, such as suction
brushes (optional) can be directly at-
tached to the connecting piece and
thus connected to the suction hose.
For convenient working even in tight
spaces.
The removable handle can be attached
between the accessories and the suc-
tion hose if necessary.
See position 14.
Recommendation: In order to vacu-
um the floor, attach the handle to the
suction hose.
Illustration
Connect the handle with the suction
hose until it snaps in place.
Illustration
To remove the handle from the suc-
tion hose, press the notch using
your thumb and pull off the handle.
Carrying handle
Cable hook
Blowing connection
Container closure
Parking position
Accessory mount
Steering roller
Filter bag
Cartridge filter
Suction hose with connecting
piece
Removable handle
To Next Page
Loading...
Need help?
General
Weight and Dimensions
