Kärcher WD 5 P User Manual

English 11

Position 0: The appliance is
switched off. Electric tool is sup-
plied with voltage.
 Adapt the adapter to the connection
diameter of the electric tool using a
knife if necessary.
 Plug the enclosed adapter onto the
handle of the suction hose and con-
nect the electric tool with the con-
nection.
 Connect the mains plug of the elec-
tric power tool to the vacuum clean-
er.
 Switch the appliance on (move the
rotary switch to the left to position
MAX) and start working.
Note: As soon as the electric tool is
switched on, the suction turbine starts
with a 0.5 second delay. If the electric
tool is switched off, the suction turbine
continues to run for approx. 5 seconds
in order to vacuum up the remaining
dirt in the suction hose.
Working with electrical power
tools
1.
2.
3.
1.
2.
A

Kärcher WD 5 P Specifications

General

Input power	1100 W
Power source	AC
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Maximum input power	1800 W
Annual energy consumption	- kWh
Type	Drum vacuum
Cordless	No
Hose length	2.2 m
Cleaning type	Dry&wet
Dust capacity	25 L
Product color	Black, Yellow
Tube material	-
Container material	Plastic
Dust container type	Bagless
Proper use	Professional
Noise level	- dB
Cable length	5 m
Cleaning surfaces	Carpet, Hard floor
Park/storage assist	Yes

Weight and Dimensions

Depth	382 mm
Width	418 mm
Height	652 mm
Weight	8500 g