To Next Page
R
Robert LangAug 3, 2025
What to do if the Kärcher WINDSOR Chariot 3 battery has a low SOC?
- CclarkjoannAug 3, 2025
If your Kärcher Vacuum Cleaner battery indicates a low state of charge (SOC), stop discharging it and charge the battery.
What to do if the Kärcher WINDSOR Chariot 3 battery has a low SOC?
If your Kärcher Vacuum Cleaner battery indicates a low state of charge (SOC), stop discharging it and charge the battery.
What to do if Kärcher WINDSOR Chariot 3 Vacuum Cleaner shows high temperature?
If your Kärcher Vacuum Cleaner indicates a high temperature, stop discharging or charging it, and allow the battery to cool down.
What to do if Kärcher WINDSOR Chariot 3 shows low temperature?
If your Kärcher Vacuum Cleaner indicates a low temperature, stop discharging or charging it.
What to do if my Kärcher Vacuum Cleaner has an over current issue?
If your Kärcher Vacuum Cleaner is experiencing an over current issue, reduce the current.
What to do if the Kärcher Vacuum Cleaner battery turns on then off?
If the Kärcher Vacuum Cleaner battery turns on briefly and then shuts off, it's likely in a low voltage or low SOC state. Connect it to the charger and turn the battery on.
What to do if Kärcher Vacuum Cleaner shows high voltage?
If your Kärcher Vacuum Cleaner indicates high voltage during charging, stop the charging process.
What to do if Kärcher WINDSOR Chariot 3 Vacuum Cleaner shows low voltage?
If your Kärcher Vacuum Cleaner indicates a low voltage, do not discharge the battery. If any discharge current is detected, the battery will enter a Low Voltage Fault. You can charge the battery in Low Voltage Recovery mode. If no charge current is detected within 2 minutes, the Battery Management System (BMS) will turn off the battery.
General| Brand | Kärcher |
|---|---|
| Model | WINDSOR Chariot 3 |
| Category | Vacuum Cleaner |
| Language | English |
Provides an overview of the machine and warranty registration instructions.
Explains the manual's structure and how to find information effectively.
Illustrates the location of safety labels on the machine.
Lists essential safety precautions for operating the machine.
Defines hazard intensity levels (Warning, Caution, For Safety) used in the manual.
Lists the technical specifications and dimensions of the machine.
Details the function of each control on the machine's interface.
Guides on pre-operation checks, starting, and normal vacuuming procedures.
Explains how to stop the machine and manage the vacuum bag and debris tray.
Outlines routine maintenance tasks and their recommended intervals.
Covers battery installation, handling, and charging procedures.
Provides solutions for common problems like no power, poor propulsion, or motor issues.
Lists part numbers for common replacement items like brushes, filters, and wheels.
