Kargo Master 40070 - Installation Procedure; Step 1: Find Location; Step 2: Attach Unit

Installation Instructions – 40070
Step 1 – Find Location
• Find desired location for drawer unit to be installed.
• Slots can be found along the shelf of most
KargoMaster shelf units.One can make use of these.
• If desired, place drawer unit (A) in any desired
location, mark holes and drill with 1/4" drill.
Step 2 – Attach
• Bolt drawer unit to shelf using a No10 x 5/8” round heads (1), No10 split lock washers (2) and
a No10 flat washers (3).