Karlyn 20103 - Page 8

8
Turn of the Century
TM
ASSEMBLY INSTRUCTIONS
14
13. Install candelabra-base bulbs (40W max.) into the
sockets in the light kit.
14. Attach the glass shade by inserting the three spring
clips inside the neck of the glass and rmly push the glass
up until it is secured to the light kit.
Note: The glass will snap into place if installed properly.
13
Light Kit
Bulb
Spring Clip
Pull Chain Extension
Glass
Shade
15
15. Attach pull chain extensions to the pull chains.
16
17. Restore the power at the main fuse or circuit breaker.