1110
Technical specications
Phono IN connectors RCA
Mic IN connectors 6,3 mm jack (mono)
Power supply Through power adaptor (Input 230V ~ output 12V - 300 mAh)
Center polarity: +
Input level 0,5mV MIC - 3mV PHONO
Input impedance 50K Ohm - 1KHz
Gain 50db MIC - 34dB PHONO
Sensitivity >48db MIC - >55db PHONO
Frequency response 70Hz - 20kHz
Output level 150mV RMS
Output impedance >10K Ohm
Dimensions 135 x 70 x 40 mm
Weight 0,25 Kg
The manufacturer, in order to improve its products, reserves the right to modify their characteristics whether technical
or aesthetic, at any time and without notice.