Karma Ergo-Lite Series - 4.15 Backrest Angle Adjustment; 4.16 Flip Back and Height Adjustable Armrest

18
4.15 Backrest Angle Adjustment
To adjust the backrest angle, follow the instruction as listed below:
4.15.1 Use the tool provided by KARMA to loosen and remove the screws at the
both bottom sides of the backrest frame. (See Figure 4.35)
4.15.2 Adjust the backrest forward or backward to the position as desired. （-5°、
0°、5°）(See Figure 4.36)
4.15.3 Tighten the screw and put armrest and backrest cushion back to the seat.
4.15.4 Backrest angle adjustment is now completed.
Figure 4.35
Figure 4.36
4.16 Flip Back and Height Adjustable Armrest
Hold the front of the armrest and pull backward to flip back the armrest.
4.16.1 Release the rear wheel. (See Figure 4.38)
4.16.2 Use the tool to loosen the screw on the armrest tube to adjust the armrest
height. (See Figure 4.39)
4.16.3 Adjust upward or downward to the desired height. (See Figure 4.40)
Figure 4.37
Figure 4.38
Figure 4.39
Figure 4.40