Karma Ergo-Lite Series - 4.18 Anti-Tippers

19
4.17 Upholstery
When upholstery is loose, you can tighten it which by pulling and re-attaching the
Velcro. (See Figure 4.41 and Figure 4.42)
Figure 4.41
Figure 4.42
4.18 Anti-Tippers
The main purpose of anti-tippers is to prevent the user from turning over.
4.18.1 When you install the anti-tippers, if the anti-tippers are adjustable, please
make sure the distance between the end of each anti-tipper and the rear
wheel is at least 5cm; the distance to the ground does not exceed 5cm. (See
Figure 4.43)
4.18.2 The release pin should be protruding once you have installed the
anti-tippers. Please try to pull forward and backward to check if the
anti-tippers are immovable. (See Figure 4.44)
Figure 4.43
Figure 4.44
CAUTION:
● If the anti-tip tubes are not fitted, or have been fitted incorrectly, there is a
risk of tipping over and of injury.