Karmek LISA - Page 31

31
PROBLEM POSSIBLE CAUSE SOLUTIONS
The stove is blocked for
an unsuccessful pellet
supply.
Technical problem with the
screw.
IMPORTANT: unplug the
stove
before
- ridding the screw of
possible obstructions
- ridding the chute of
possible obstructions
- removing the pellet
dust accumulation
from the bottom of the
tank.
The stove is
precociously jammed,
and presents an
irregular combustion.
Flue jammed
or too long.
Too humid pellets.
Excessive quantity of pellets
in the tank.
Wind contrary to the outlet
flow.
Insufficient intake in the grate.
Recent change in the kind of
pellets used.
See the
paragraph
about the
installation of the stove.
Check if the flue is clean.
Check the quality of the pellets.
Contact the authorized assistance
center.
Check the anti-wind terminal and/or
install it if necessary.
Check if the grate is correctly
positioned and if it is clean; check is
the air intake pipe is clean.
Contact the authorized assistance
center.
Contact the authorized assistance
center.
Smell of smoke in the
room – The stove
switches off.
Bad combustion.
Malfunctioning of the fumes
fan.
The installation of the flue
was incorrectly performed.
Contact the authorized assistance
center.