EasyManua.ls Logo

Kasanova GO SMART - Page 44

Kasanova GO SMART
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
the speed during use of the electric kickscooter; speed is showed in Km/h by default, but it can be switched
to M/h (1);
the gear: maximum speed with gear 1 is of 10Km/h, maximum speed with gear 2 is of 15Km/h and maximum
speed with gear 3 is of 20Km/h. Gears can be switched pressing the power-button. For safety reason, the
change of gear can be done when the kickscooter is stopped only (2);
the icon for lights: front and rear lights must always be tuned-on during the use of the kickscooter (3);
Bluetooth icon: not valid for this model (4);
brake icon: it turns on when the brake lever is used (the light of the rear light will be brighter when the brake
is activated) (5);
ODO info that indicates the total mileage (this information will be kept after switching off the device) (6);
TRP info that indicates the single driving distance after switching on (the distance info will be cleared after
switching off the device) (7);
ODO or TRP details (8);
alarm icon for low battery (9): when all four led lights in the bottom are fully turned-off, this icon turns-on; it
is suggested to stop, turn-off the electric kickscooter, and provide for a new battery charge;
led lights that shows the battery level of charge (10): during use of the kickscooter, the 4 LED lights are lit.
During consumption of the battery the indicators turn-off, one by one. If 4 LED lights are lit, mean full power.
If 3 LED lights are lit, mean 85-70% power.
When only 1 LED light is lit, there is a charge of around 10-15%. Slow-down, stop and provide for a new
battery charge.

Related product manuals