First, connect the cable of the battery-charger to the kickscooter.
Then, connect the mains.
The indicator light on the charger will be red: this grants that the charge is proceeding.
2. When the indicator light is turned to green color, the battery is fully charged.
Please stop charging or the battery life will be reduced.
Charging time is around 3-4 hours. Too long charging time will affect the battery life.
3. Remove the cable of the battery charger.
Put the cover back to position.
WARNING
When battery is completely empty (0% charge), a normal charge of 3-4 hours might not be sufficient.
It is necessary to proceed with a 24 hours charge.
Keep the product and the battery at the recommended temperature to keep the highest efficiency of the
kickscooter and of the battery.
If used in an extreme cold or hot environment, the charging time sill be lengthened too.
Working temperature: -10°C 40°C.
Please check the temperature of the battery during the charging process.
Charging temperature must be: 0°C 40°C. Humidity level during charge must be: 5% 95%.
If the temperature is higher than 40°C, the scooter functioning might be damaged and battery life might be
reduced.
To Next Page
Loading...
