SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 230303.
CAMERA GL VE
KT/VA-601-6
cg-6
KATA. A SIMPLE CASE
OF BETTER DESIGN.
Development & production by KATA Ltd.
POB 4253 Jerusalem , Israel 91042
Tel: + 972-2-5388844
Fax: + 972-2-5388845
www.kata-bags.com
Info: technical@kata-bags.com
Sales: video@kata-bags.com
Overlapping
flaps
Two optional connecting
points for Rain Hood pouch
Free access to all
bottom areas
Rain Hood
pouch
Right hook
strap
Vinyl window
Main zipper
Viewfinder glove
Back buckle
Front
buckle
Emergency
Rain Hood
Back fitting
point
Closing pullers
Left hook
strap
Pull to open!
Vinyl window
Pull in this direction
to open
Hook & loop
quick closing
4. Setup card - For access to setup card slot open
main zipper (No.1) and buckles (No.3, No.5).
5. For access to covered buttons, fold overlapping flaps
inwards (No.14).
6. VIEW FINDER GLOVE
Open buckle and zipper and pull over VF.
If necessary, cut out a window to expose the Tally light.
7. Rain hood
Emergency Rain Hood (No.20)
in pouch (No.4).
The Rain Hood pouch has two
optional connecting
points: back and front (No.7)
1. Dressing the camera
Open the main zipper (No.1) and buckles (No.3, No.5).
Put the camera in the glove.
Stretch the bottom part to fit around points (No.17) and (No.19)
(important!)
Pull up and close zipper (No.1).
Close buckles (No.3) and (No.5).
(If you use a mic attached to the body, cut a slot in the Neoprene
according to line marked inside, before dressing the camera).
2. Adjustment to battery
First close left hook strap, (No. 12) then adjust back part to your
battery with right hook strap (No.11)
Use the left hook strap for changing battery (No.12)
Note:
do not open right hook strap (No.11) each time you change the battery.
3. Changing tape - Pull to open! system.
For changing tape pull strap (No.2) in a diagonal direction (No.18),
opening the whole zipper in one movement.
The hook & loop (No.16) enables quick temporary closing.
Use zippers (No.15) for tight closing.
GENERAL INSTRUCTIONS
1
3
4
6
7
5
2
8
9
10
14
13
12
16
15
18
17
20
Front fitting
point
19
11
includes Rain hood and flexible VF cover
Cut-out
Speaker Hole
for PANASONIC AJ D200 / D210 / D215 / D300 / D400 /
D410/ D610/ D700/D800/ D810/ D910 / PD900 / SDX900 /
SDC915 / HDC20A / HDC27A
for
PHILIPS BTS LDK-700 for HITACHI Z-V1A
To Previous Page
Loading...